HIC, is manufacturers of anti-static electric mat, neoprene sheet,nitrile insertion sheet rubber,cork sheet,sbr black rubber sheet, animal-stud mat, pulley lagging rubber sheet, skirt board exporters from India.

Rubber Sheet SYNTHETIC Product Specification

* Rubber Sheet
Grade
Thickness Range (mm) # Dimension Size W x L (mm) Finish of Rubber Sheet Approx Weight (kgs)
Per Sheet
(Per 1mm Thick)
Rubber Sheeting
Characteristics
* Categorie Gamme d èp
(en mm)
# Dimension
( W x L)
Finition de plague Poidx approx par plaque ép 1mm Caracteristique
* Grado limites de densidad (mm) # Tamano dimension ( W x L) Perfecci on de Hoja Peso Approximade mente (kgs) de cada hoja Caracteristicas
* Grau Espessure Limites Dimensao Tamanho Acabamento de Chapa Peso Aprox (kg)
par chapa (1mm espessure)
Caracteristicas
* Grad Dicke (mm) # Massen
(W x L) mm
Zunchtung des Bleches Gewicht (kg) pro Bleche (1mm Dicke) Merkmale
* Grado Spessore gamme # Dimensioni
(W x L )
Finitura Peso Appr (kg) del
nestro (spess 1mm)
Caracttenstiche
Rubber Compounded Sheet Natural Rubber ¨ General Purpose ¨ L usage general ¨ Uso general ¨ Uso Genal ¨ allgemeiner Zweck ¨ per L Impiego Generale
1. (a) Natural Rubber Sheet (NR)

1. (b) NR (blended)
Corrugated/chequered/plain
1.5 to 3.0 6.0 to 25.0 1000 x 2000
do = 1 m x 2 m
Moulding -do- 4 + 10% -do- Resistant to temp. (hot air) –250C to + 600c, hot water upto 500C steam upto 700C, moderate resistance to acetic acids, alkalies, vegetable oils, gases like oxygen, nitrogen & sulphurdioxide and sea water.
Rubber Sheet Shot Blasting ¨ General Purpose ¨ L usage general ¨ Uso general ¨ Uso Geral ¨ allgemeiner Zweck ¨ per L lmpiego Generale
1. (c) NR High Pressure 1.5 to 25.0 1000 x 2000 Moulding 3.5 + 10%
Rubber Sheet Heat Resistant & Steam Proof ¨ General Purpose ¨ L usage general ¨ Uso general ¨ Uso Genal ¨ allgemeiner Zweck ¨ per L Impiego Generale
2. Synthetic Rubber Sheet
SBR (100%styrene butadiene)
1.5 to 25.0 1000 x 2000 Moulded 3.3 + 10% Resistant to temp. (hot air) –250C to + 700c, hot water upto 900C steam upto 1200C, moderate resistance to acetic acids, alkalies, vegetable oils, gases like oxygen, nitrogen & sulphurdioxide and sea water.
Rubber Sheet Acid & Solvent Resistant ¨ Resisant au solvant et a L acide ¨ Resistance a Solvente Y a acido ¨ Resistente ao acido e ao dissolvente ¨ saure-und losungsmittelfes ¨ Resistente allacido e solvente
3. Nitrile Rubber Sheet
(a) NBR (65% Nitrile)
(b) NBR (65% Nitrile)
(c) NBR (100% Nitrile)
0.5 to 6.0 1.5 to 50.0
1.5 to 50.0
1000 x upto 5000 long
1000 x 2000
-do-
Calendered Moulded
Moulded
1.6m2 + 15% 3.2 + 10%
3.1 + 10%
Resistant to temp. (hot air) –300C to + 900c, hot water upto 1000C, steam upto 1100C, moderate resistance to fatty acids, chlorine gas and good resistance to acetic acids, alkalies, hydrochloric acid, vegetable & mineral oils, gases like oxygen, nitrogen and sea water.
* Rubber Sheet
Grade
Thickness Range (mm) # Dimension Size W x L (mm) Finish of Rubber Sheet Approx weight (kgs)
Per Sheet
(Per 1mm Thick)
Rubber Sheeting
Characteristics
Rubber Sheet Flame and Solvent Resistant ¨ Resistant au solvant et a la flame ¨ Resistente a Sovente Y a fuego ¨ Resistente a chama e ao disolvente ¨ flame-und losungsmittelfest ¨ Resistente alla flamma e solvente
4. Neoprene Rubber Sheet (a)CR (65% Neoprene)
(b) CR (65% Neoprene)
(c) 100% Neoprene
0.5 to 6.0 1.5 to 50.0
1.5 to 50.0
1000 x upto 5000 long
1000 x 2000
-do-
Calendered Moulded
Moulded
1.6m2 + 15% 3.2 + 10%
3.1 + 10%
Resistant to temp. (hot air) –300C to + 1000c, hot water upto 1000C steam upto 1250C, moderate resistance to fatty acids, hydrochloric acid, mineral oils, gases like chlorine, ozone & sulphur dioxide and good resistance to alkalies, vegetable oils, gases like oxygen & nitrogen, open flame and sea water. Also resistant to food where non-toxic grades are required.
Rubber Sheet Steam & Heat Resistant ¨ Resistant au vapeur et a la chaleur ¨ Resistente a vapor Y a calor ¨ damp-und warmefest ¨ Resistente at vapore e ca e calore
5. EPDM Rubber Sheet
Ethylene – propylene
(100% EPDM)
1.5 to 25.0 1000 x 2000 Moulded 3.1 + 10% Resistant to temp. (hot air) –100C to + 1700c, hot water upto 1000C steam upto 1600C, moderate resistance to acetic acids and good resistance to fatty acids, sulphuric acid, hydrochloric acid, nitric acid, alkalies, vegetable oils, almost all gases and sea water.
Rubber Sheet Super Heat Resistant ¨ Resistant a la chaleur extra ordinaire ¨ Resistente a calour mucho ¨ Resisente ao super cotor ¨ super warmefest ¨ Resistente al surriscaldamento ¨
6. Silicon Rubber Sheet
MQ (100% Silicon)
1.5 to 12.5 1000 x 2000 Moulded 3.1 + 10% Unique resistant to temp (hot air) upto 4590C sunlight, water, ozone, food & other gases and good resistance to acids.
Cork Sheet Oil Resistant & Thermal Insulator
7. Cork Sheet Rubberised
a) 100% Nitrile Blended
b) Nitrile Rubber Blended
Cork Sheet
3 to 25.0 3 to 25.0 600 x 900 do = 2 ft x 3 ft Moulded -do- 0.6 + 10% 0.8 + 10% Excellent oil resistant & good resistance to gas or other liquid upto 1100C temperature having good compression properties without lateral spread, retaining 80% of original thickness. Conforms IS:4253 applied suitably in transformers, switch gears, automobiles, etc.
Floor Insulation Safety Mat Antistatic Rubber
8. Electrical Rubber Mat (Antistatic Chequered,
Anti-skid)
6.5 to 50.0 1000 x 2000 Moulded 2.7 + 10% Resistant to voltage upto 33,000 V electric current & good water absorption. Conforms IS:5424 and BS:921, applied suitably in power house, thermal power plants electricity boards, etc for electrical shock prevention.

Also, produced insulating mats as per IS:15652 and switchboard matting as per IEC:61111.
Jointing General Purpose Insertion Sheet
9. Insertion Rubber Sheet (white or coloured) 1.5 to 25.00 1000 x 2000
1200 x 5000
Calendered in long lengths 3.8 + 10% Good resistance to steam & water.
Conforms IS:638

Hardness (IRHD) : Type A:50 to 65, Type B:66 to 80 ; Tolerance in Size : +1% ; Tolerance in Thickness : + 2.5% ; Tolerance in Hardness : +5. * Manufacture of rubber sheeting in other grades are also undertaken on enquiry or order than stated above. * Manufacture of Neoprene Rubber Cords, Silicon Rubber Cords also undertaken.

Rubber Sheeting Information To Be Supplied With Enquiry or Order

1. Thickness is mm (sub. To tol. +2.5%)
2. Size i.e. w x l (sub. To tol. + 1%)
3. Rubber Grade
4. Finish i.e. plain or chequered
5. Hardness Shore A (sub. To tol. + 5)
6. Colour
7. Quantity in Nos.


Rubber Compound Testing

Rubber Compound Testing


Floor Insulation Mat Rubber Sheets packed in rolls

Floor Insulation Mat
Rubber Sheets packed in rolls

 

Disclaimer: Information's, written and verbal are provided by HIC, relative to its products which it determines to be reliable & no liabilities of whatsoever nature in regards to its uses. The purchaser of UNIVERSAL brand industrial products should determine for itself the suitability of such products.

2003 HIC International Co Inc. All Rights Reserved

website-hit-counters.com

Email HIC International

Chat with HIC on Skypeanilguptahic

Follow HIC on Facebook

Connect HIC on LinkedIn

Watch HIC videos on Youtube

Follow HIC on Twitter