HIC,is manufacturers of nylon transmission belts,tangential belts,baler belting,rubber flat belt,leather flat belts exporters from India.

Rubber Belting FLAT Product Specification

(Superseding BS:351 and IS:1370)

Rubber Belt Quality
Type
Belting Industrial Brands #Drive Belt
Edge Construction
~Transmission BeltingWidths (mm) *Belts Colour ~Belting
Ply
App. Wt. Per 25mm=1" per ply per meter
Qte Type Marque #Construction de dentelle ~Largeur *Couleur ~Toron Poid de courroie par 25mm de largeur par toron/m
Tipo de Calidad Marcas #Borde construccion ~Anchura + (mm) *Color Acero ~Travesias Peso de cinta(aprox.)
1. 28oz light duty Universal Super Cut 25, 31, 37, 50, 62, 75, 88, 100 light grey With blue sides 3,4,5 0.037
2. 31oz medium duty i) Universal Kinetic

ii) Tor Steel

iii) Tusker Super Deluxe
Cut 25, 31, 37, 50, 62, 75, 88, 100, 125, 150, 175, 200 do 3,4,5,6 0.038
3. 34oz heavy duty i) Universal Oak

ii) Dynapower

iii) Cannon
Cut 37, 50, 62, 75, 88, 100 125, 150, 175, 200, 225, 250 do 4,5,6 0.040
150, 175, 200, 250, 300 8
4. 37oz extra heavy duty exclusively mfd. to our standards i) Universal Brute

ii) Rhino (super tough quality)
Cut 75, 100, 125, 150, 200, 250 150, 200, 250, 300, 350, 400 do 4,5,6 8,10,12 0.045
5. 31oz Black

medium to high duty
i) Universal Black Belt

ii) Black Stone (with 0.4 mm app. thick black rubber coating on face & bottom frictioned)
Cut 75, 100, 125, 150 black 4 0.045

# Round edge construction with red stripe in middle are also manufactured in 28oz, 31oz duck quality, types subject to min. quantity of orders are placed as required at higher charges than cut edge for which please refer to us.

* Other colours are also manufactured, like orange (TBS) with red sides or light green with green sides on little extra charges subject to min. quantities of orders are placed.

~Widths and piles not listed above can be manufactured to order ranging sizes from # 25mm to 1050mm widths & 2 ply to 14 ply. Tolerance in width of +,- 3mm shall be applicable upto 125mm; +, - 4mm above 125mm upto 300mm; +, - 5mm above 300mm & upto 500mm; +, - 10mm above 500 & upto 750 ; +,- 15mm above 750 mm & up to 1050 mm widths.

MINIMUM RECOMMENDED BELT FLAT PULLEY DIAMETERS (in mm)

Belting Number of Plies Belt speed (mtrs/sec.)
Nombre de torons Vitesse de courroie (metres/sec.)
Numero de travesias Velocidad de cintas (metros/seg.)

3
4
5
6
7
8
10

10 15 20 25 30
90
140
200
250
355
450
630
100
160
225
315
400
500
710
112
180
250
355
450
560
800
140
200
315
400
500
630
900
180
250
355
450
560
710
1000

RECOMMENDED BELT DRIVE FLAT PULLEY WIDTHS

Belt Width Pulley to be wider than the belt width by
Largeur de courroie Poulie doit etre plus large que courrole par
Anchura de Cinta Polea a ser mas ancha que la anchura de la cinta por
Upto and including 125 mm
From 125 mm upto & incl. 250 mm
From 250 mm upto & incl. 375 mm
From 375 mm upto & incl. 500 mm
15mm
25mm
40mm
50mm

DIRECT DRIVE BELT CLIPPER FASTENERS

While vulcanized splices i.e., endless belt is strongly recommended but whenever it is not convenient to use endless belts, then wire hook-joints/sheet steel stampings/strap or plate joints may please be used, Please refer for fitting to the fasteners manufacturer/supplier for suitable selection.

UNIVERSAL NYLON TRANSMISSION BELTINGS TECHNICAL SPECIFICATIONS

            Col. Mat. COF Col. Mat. COF               Col. Mat. COF Col. Mat. COF  
LEATHER NYLON BELTINGS RUBBER NYLON BELTINGS
LL-3 3.6 3.4 20 2 60 W L 0.4 W L 0.4 80 AR-1 2.4 3.0 40 4 120 G NR 0.7 G NR 0.7 100
LL-6 4.0 3.7 40 4 120 W L 0.4 W L 0.4 80 AR-2 2.6 3.3 80 8 240 G NR 0.7 G NR 0.7 100
LL-10 4.4 4.2 80 8 240 W L 0.4 W L 0.4 80 AR-3 2.9 3.6 100 10 330 G NR 0.7 G NR 0.7 100
LL-12 5.0 4.6 100 10 330 W L 0.4 W L 0.4 80 AR3/6 6.0 6.7 100 10 330 G NR 0.7 G NR 0.7 100
LL-20 6.5 5.5 160 16 480 W L 0.4 W L 0.4 80 AR-4 3.3 4.2 160 16 480 G NR 0.7 G NR 0.7 100
LL-30 7.5 6.7 240 24 720 W L 0.4 W L 0.4 80 AR-5 3.9 4.6 220 19 570 G NR 0.7 G NR 0.7 100
LL-40 8.0 7.8 320 32 960 W L 0.4 W L 0.4 80 ARS-1 2.4 3.0 40 4 120 G NR 0.7 Y NR 0.7 100
LL-50 10 8.9 400 40 1200 W L 0.4 W L 0.4 80 ARS-2 2.6 3.3 80 8 240 G NR 0.7 Y NR 0.7 100
LF-3 2.2 2.0 20 2 60 R F 0.3 W L 0.4 80 ARS-3 2.9 3.6 100 10 330 G NR 0.7 Y NR 0.7 100
LF-6 2.4 2.3 40 4 120 R F 0.3 W L 0.4 80 ARS-4 3.3 4.2 160 16 480 G NR 0.7 Y NR 0.7 100
LF-10 3.1 2.8 80 8 240 R F 0.3 W L 0.4 80 TANGENTIAL BELTS
LF-12 3.4 3.5 100 10 330 R F 0.3 W L 0.4 80 TA 15M 1.8 2.0 50 5 150 PG NR 0.7 B NR 0.7 100
LF-20 4.8 4.0 160 16 480 R F 0.3 W L 0.4 80 TA 16M 1.8 2.1 50 5 150 PG NR 0.7 B NR 0.7 100
LF-30 6.0 4.5 240 24 720 R F 0.3 W L 0.4 80 TA 24M 2.4 3.0 100 10 300 PG NR 0.7 B NR 0.7 100
LF-30 7.3 6.3 320 32 960 R F 0.3 W L 0.4 80 TA 24MS 3.0 3.7 100 10 300 PG NR 0.7 B NR 0.7 100
LF-50 8.5 7.3 400 40 1200 R F 0.3 W L 0.4 80 TA 29HX 3.2 3.9 150 15 450 PG NR 0.7 B NR 0.7 100
L-6 2.0 2.2 40 4 120 T PS 0.2 W L 0.4 80 TA 29HXS 4.0 5.1 150 15 450 PG NR 0.7 B NR 0.7 100
L-12 2.8 2.8 100 10 330 T PS 0.2 W L 0.4 80 SPINDLE TAPES
L-16 3.9 3.4 160 16 480 T PS 0.2 W L 0.4 80 ST-0 0.7 0.5 10 0.5 20 B F 0.20 W F 0.20 80
LR-6 5.7 6.6 40 4 120 G NR 0.7 W L 0.4 80 ST-3 0.8 0.6 10 1 30 B F 0.20 W F 0.20 80
LR-10 4.2 4.1 80 8 240 G NR 0.7 W L 0.4 80 ST-6 0.9 0.7 20 2 60 B F 0.20 W F 0.20 80
LR-12 4.5 4.5 100 10 330 G NR 0.7 W L 0.4 80 WW-3 0.7 0.55 10 1 30 W F 0.20 W F 0.20 80
FABRIC NYLON BELTING WW-6 0.8 0.65 20 2 60 W F 0.20 W F 0.20 80
FF-0 0.6 0.4 10 0.5 20 R F 0.25 R F 0.25 80 WW-6 1.5 1.05 20 2 60 W F 0.20 W F 0.20 80
FF-3 0.8 0.6 20 2 60 R F 0.25 R F 0.25 80 WW-8 1.0 0.9 40 4 120 W F 0.20 W F 0.20 80
FF-6 1.0 0.9 40 4 120 R F 0.25 R F 0.25 80 CONDENSOR TAPES
FF-10 1.5 1.4 80 8 240 R F 0.25 R F 0.25 80 Astra 3.2 2.8 40 4 120 BR L 0.4 BR L 0.4 80
FRI 1.6 1.4 50 4 120 R F 0.25 G F 0.7 80 Coriatex 3.2 3.2 40 4 120 BR L 0.4 BR L 0.4 80
Col

MAT

COF

W

R

T

G

PG
- Colour

- Material

- Coefficcient of friction

- White

- Red

- Transparent

- Green

- Parrot Green
B

BR

Y

L

F

PS

NR
- Black

- Brown

- Yellow

- Leather

- Fabric

- Polyamide Strip

- Nitrile Rubber
Tolerance

Length
500 - 5000 mm + 0.5 %
5001 - 15000 mm + 0.3 %
150001 & Abv + 0.2 %

Width
Upto 50 mm + 1 mm
51 - 100 mm + 2 mm
101 - 500 mm 3 mm
501 - 750 mm 10 mm
751 - 950 mm 15 mm

Thickness
Rubber Series 0.15 mm
Leather Series 0.3 mm
ST/FF Series 0.05 mm

CHECK LIST FOR PROPER INDUSTRIAL BELTING MAINTENANCE

  • New belts are stored in a cool, dry and well ventilated place.
  • Belts are jointed with correct & suitable fasteners.
  • Belt dressing is not used.
  • Belts are kept clean free form oil and grease on pulley faces.

BELTINGS LENGTHS MANUFACTURED, ORDER QUANTITIES AND PACKING

  • Belts are supplied in roll lengths of 100 meters in each size subject to length tolerance of + 12%, -2% in running lengths & billing is done in terms of actual length.
  • Min. quantity acceptable are 1200 meters in one quality type & in 1 type of ply rating but may have different sizes (widths) due to manufacturing requirements.
  • Packed in polythene and then further packed in sea worthy jute cloth.

 

Transmission Belts Information To Be Supplied With Enquiry or Order

1.Width of belt (mm)
2. Ply (Nos) / Thickness
3. Quality of Fabric / Belt Type (nylon or rubber or leather ) & Application
4. Color of Belt (generally Grey / Green,else specify)
5.Length of Roll (mtrs) sub. to tol.+10%, -2% or Endless Size & Qnty.

Disclaimer: Information's, written and verbal are provided by HIC, relative to its products which it determines to be reliable & no liabilities of whatsoever nature in regards to its uses. The purchaser of UNIVERSAL brand industrial products should determine for itself the suitability of such products.

2003 HIC International Co Inc. All Rights Reserved

website-hit-counters.com

Email HIC International

Chat with HIC on Skypeanilguptahic

Follow HIC on Facebook

Connect HIC on LinkedIn

Watch HIC videos on Youtube

Follow HIC on Twitter